Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly.
CAUTION
Observe the following precautions.
Failure to do so may result in death or serious injury.
●Do not adjust the position of the driver’s seat while driving.
Doing so could cause the driver to lose control of the vehicle.
●Do not place a cushion between the driver or passenger and the seatback.
A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint.
●Do not place anything under the front seats.
Objects placed under the front seats may become jammed in the seat tracks and stop the seat from locking in place. This may lead to an accident and the adjustment mechanism may also be damaged.
●When driving over long distances, take regular breaks before you start to feel tired.
Also, if you feel tired or sleepy while driving, do not force yourself to continue driving and take a break immediately.
Inspection procedure
1 Check side squib(lh) circuit(airbag sensor assy center – front
seat airbag assy lh)
Disconnect the negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
disconnect the connectors between the airbag sensor
assy center and the front seat airbag assy (lh ...
Circuit description
Refer to dtcs p0100
Dtc no.
Dtc detection condition
Trouble area
P0101
After engine is warmed up, conditions (a) to (d) continue for
more than 10 seconds (2 trip detection logic):
engine speed less than 900 rpm
throttle valve fully closed
&nbs ...
Installation with LATCH system
1 Widen the gap between the seat cushion and seatback slightly.
► Type A
2 Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint
has a top tether strap, the top tether strap should be latched onto the top tether
strap anchor.
For owners in Canada: The symbol ...