BMW 5 Series 2016-2023 Owners Manual: With an emergency wheel: enlarging the cargo area
Concept
The emergency wheel and any related components can be temporarily removed to enlarge the cargo area.
Removing the emergency wheel and the storage compartments
1. Remove the cargo floor panel. To do this, pull the cargo floor panel upward directly behind the rear backrests.
2. Open the ratchet strap.
3. Remove the tool holder.
4. Remove the emergency wheel from the storage well.
5. Loosen the ratchet strap from the lashing eyes.
6. Remove the storage compartment.
7. Remove the storage well
8. Insert the cargo floor panel.
Inserting the emergency wheel and the storage compartments
Proceed in reverse order to insert the emergency wheel and the storage compartments.
Ski and snowboard bag
The ski and snowboard bag is contained in a protective jacket in the cargo area.
Follow the installation and owner's manual included in the protective jacket.
Depending on the vehicle equipment: remove the emergency wheel from the vehicle to mount the ski and snowboard bag.
Through-loading system
Concept
The cargo area can be enlarged by folding down
the rear seat backrest.
General information
The rear seat backrest is divided at a ratio of 40-
20-40. The side rear seat backrests and the
cente ...
Other materials:
Positioning a floor jack
When using a floor jack, follow the instructions in the manual provided with
the jack and perform the operation safely.
When raising your vehicle with a floor jack, position the jack correctly.
Improper placement may damage your vehicle or cause injury.
◆ Front
◆ Rear
1 Take out ...
How to proceed with troubleshooting
1 Vehicle brought to workshop
2 Customer problem analysis
3 Check and clear dtcs and freeze frame data
4 Problem symptom confirmation
Symptom does not occur: go to
step 5
Symptom occurs: go to step 6
5 Symptom simulation
6 Dtc check
There is no
output: go to step 7
There is outp ...
Throttle body assy
Components
Removal & installation and disassembly & reassembly
1. Drain coolant
2. Remove cylinder head cover no.2
Remove 2 nuts, 2clips and the cylinder head cover no. 2.
3. Remove air cleaner cap sub–assy
Disconnect the maf connector.
disconnect the vsv conn ...
