Vehicle tool kit
The onboard vehicle tool kit is located in the left storage compartment of the cargo area.
Wiper blades
Safety information
NOTICE
The window may sustain damage if the wiper falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold the wiper firmly when changing the wiper blade. Do not fold or switch on the wiper without a wiper blade installed.
NOTICE
Folded-away wipers can be jammed when the hood is opened. There is a risk of damage to property. Make sure that the wipers with the wiper blades mounted are folded down onto the windshield before opening the hood.
Replacing
1. To change the wiper blades, fold up the wiper arms.
2. Lift the wiper all the way off of the windshield.
3. Press the button, arrow 1, and pull out the wiper blade, arrow 2.
4. Insert the new wiper blade and press it on until it you hear it snap into the holder.
5. Fold down the wipers.
Rear combination lamp assy lh
Replacement
Using a clipremover, remove the 2 clips and disconnect
the luggage compartment trim cover lh.
Disconnect the connector and remove the 3 nuts.
Pull out the rear combination light assy lh to the back of
the vehicle, and remove.
...
Body
On–vehicle inspection
1. Canada:
tighten bolts and nuts on chassis and body
tighten the bolts and nuts on the chassis parts listed below, if
necessary
Front axle and suspension
drive train
rear axle and suspension
brake system
engine mounting
other chassis parts
...
Brake
Service data
Torque specification
Parking brake
Service data
Torque specification
...