Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: Panorama View

Concept

The system provides an early look at cross traffic

The system provides an early look at cross traffic at blind driveways and intersections.

General information

Road users concealed by obstacles to the left and right of the vehicle can only be detected relatively late from the driver's seat. The cameras in the front and rear capture the sideways traffic area to improve the view.

Yellow lines in the screen display mark the front and rear end of the vehicle.

The camera image shows different levels of distortion in some areas and is thus not suitable for distance estimations.

Display on the Control Display

is running.Press the button when the engine is running.

Depending on the driving direction, the image of the respective camera is displayed:

Depending on the vehicle equipment, cross traffic warning can additionally warn against oncoming vehicles using radar sensors.

With navigation system: activation points

Concept

Positions where Panorama View should switch on automatically can be stored as activation points provided that a GPS signal is received.

General information

Up to ten activation points can be stored.

Activation points can be used when driving forward for the front camera.

Storing activation points

1. Drive to the position at which the system is to be switched on, and stop.

2. Press the button.

3. Move the Controller to the left.

4. "Add activation point".

The current position is displayed.

5. "Add activation point".

Activation points are, if possible, stored with town/city and street address, or else with the GPS coordinates.

Using activation points

The use of activation points can be switched on and off.

1. Press the button.

2. Move the Controller to the left.

3. "Settings".

4. "Panorama view, GPS-based".

5. "Panorama view, GPS-based".

Displaying activation points

1. Press the button.

2. Move the Controller to the left.

3. A list of all activation points is displayed. "Show activation points".

A list of all activation points is displayed.

Renaming or deleting activation points

1. Press the button.

2. Move the Controller to the left.

3. "Show activation points".

A list of all activation points is displayed.

4. Select an activation point as needed.

5.

Assistance functions
General information More than one assistance function can be active at the same time. The following assistance functions can be manually activated: "Parking aid lines". "Obstacle marking". "Ca ...

Setting brightness and contrast
Brightness and contrast can be adjusted with Surround View or Panorama View switched on. Via iDrive: 1. Move the Controller to the left. 2. "Brightness" "Contrast" 3. Set the desired value. F ...

Other materials:

Sockets
General information The total load of all sockets must not exceed 140 watts at 12 volts. Do not damage the socket by using non-compatible connectors. Safety information Warning Devices and cables in the unfolding area of the airbags, such as portable navigation devices, can hinder the unfolding of ...

Overhaul
1. Inspect 4th gear thrust clearance Using a feeler gauge, measure the 4th gear thrust clearance. 4Th gear thrust clearance: 2. Inspect 3rd gear thrust clearance Using a dial indicator, measure the 3rd gear thrust clearance. 3Rd gear thrust clearance: 3. Inspect 4th gear ...

Circuit description
The throttle pressure that is applied to the primary regulator valve (which modulates the line pressure) causes the solenoid valve slt, under electronic control, to precisely and minutely modulate and generate the line pressure according the extent of the accelerator pedal depressed or the o ...

© 2011-2022 Copyright www.tcorolla.net