Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: Mobility System

Concept

With the Mobility System, minor tire damage can be sealed temporarily to enable continued travel.

To accomplish this, sealant is pumped into the tires, which seals the damage from the inside.

General information

Overview

Storage

The Mobility System is in the left storage compartment

The Mobility System is in the left storage compartment of the cargo area.

Sealant container

Observe use-by date on the sealant container.

Compressor

  1. Sealant container unlocking
  2. Sealant container holder
  3. Tire pressure gage
  4. Reduce tire inflation pressure button
  5. On/off switch
  6. Compressor
  7. Connector/cable for socket
  8. Connection hose

Safety measures

Filling the tire with sealant

Safety information

DANGER

If the exhaust pipe is blocked or ventilation is insufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases contain pollutants which are colorless and odorless. In enclosed areas, exhaust gases can also accumulate outside of the vehicle. There is danger to life. Keep the exhaust pipe free and ensure sufficient ventilation.

NOTICE

The compressor can overheat during extended operation. There is a risk of damage to property.

Do not run the compressor for more than 10 minutes.

Filling

1. Shake the sealant container.

2. Pull filling hose completely out of the cover of

2. Pull filling hose completely out of the cover of the sealant container. Do not kink the hose.

3. Slide the sealant container into the holder on

3. Slide the sealant container into the holder on the compressor housing, ensuring that it engages audibly.

4. Screw the filling hose of the sealant container

4. Screw the filling hose of the sealant container onto the tire valve of the nonworking wheel.

5. With the compressor switched off, insert the

5. With the compressor switched off, insert the plug into the power socket inside the vehicle.

6. With standby state switched on or the engine

6. With standby state switched on or the engine running, switch on the compressor.

Let the compressor run for max. 10 minutes to fill

Let the compressor run for max. 10 minutes to fill the tire with sealant and achieve a tire inflation pressure of approx. 2.0 bar.

While the tire is being filled with sealant, the tire inflation pressure may sporadically reach approx. 5 bar. Do not switch off the compressor at this point.

Checking and adjusting the tire inflation pressure

Checking

1. Switch off the compressor.

2. Read the tire inflation pressure on the tire pressure gage.

To continue the trip, a tire inflation pressure of at least 2 bar must be reached.

Removing and stowing the sealant container

1. Unscrew the filling hose of the sealant container from the tire valve.

2. Press the red unlocking device.

3. Remove the sealant container from the compressor.

4. Wrap and store the sealant container in suitable material to avoid dirtying the cargo area.

Minimum tire inflation pressure is not reached

1. Pull the connector out of the power socket inside the vehicle.

2. Drive 33 ft/10 m forward and back to distribute the sealant in the tire.

3. Screw the connection hose of the compressor directly onto the tire valve stem.

4. Insert the connector into the power socket inside

4. Insert the connector into the power socket inside the vehicle.

5. With standby state switched on or the engine

5. With standby state switched on or the engine running, switch on the compressor.

If a tire inflation pressure of at least 2 bar cannot be reached, contact your dealer's service center or another qualified service center or repair shop.

If a tire inflation pressure of at least 2 bar is reached, see Minimum tire inflation pressure is reached.

6. Unscrew the connection hose of the compressor from the tire valve.

7. Pull the connector out of the power socket inside the vehicle.

8. Stow the Mobility System in the vehicle.

Minimum tire inflation pressure is reached

1. Unscrew the connection hose of the compressor from the tire valve.

2. Pull the connector out of the power socket inside the vehicle.

3. Stow the Mobility System in the vehicle.

4. Immediately drive approx. 5 miles/10 km to ensure that the sealant is evenly distributed in the tire.

Do not exceed a speed of 50 mph/80 km/h.

If possible, do not drive at speeds less than 12 mph/20 km/h.

Adjustment

1. Stop at a suitable location.

2. Screw the connection hose of the compressor directly onto the tire valve stem.

3. Insert the connector into the power socket inside

3. Insert the connector into the power socket inside the vehicle.

4. Correct the tire inflation pressure to at least

4. Correct the tire inflation pressure to at least 2.0 bar.

5. Unscrew the connection hose of the compressor from the tire valve.

6. Pull the connector out of the power socket inside the vehicle.

7. Stow the Mobility System in the vehicle.

Continuing the trip

Do not exceed the maximum permissible speed of 50 mph/80 km/h.

Reinitialize the run-flat tires.

Reset the Tire Pressure Monitor TPM.

Replace the nonworking tire and the sealant container of the Mobility System promptly.

Run-flat tires
Concept Run-flat tires permit continued driving under restricted conditions even in the event of a complete loss of tire inflation pressure. General information The wheels consist of tires that are se ...

Snow chains
Safety information Warning With the mounting of snow chains on unsuitable tires, the snow chains can come into contact with vehicle parts. There may be a risk of accident or risk of damage to property ...

Other materials:

Circuit description
Refer to dtc p0130 Hint: the ecm provides a pulse width modulated control circuit to adjust current through the heater. The heated oxygen sensor heater circuit uses a relay on the b+ side of the circuit. Monitor description The ecm uses the heated oxygen sensor information to regulate t ...

Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm: ● Unlock the doors or open the trunk. ● Vehicles without a smart key system: Turn the engine switch to the ACC or ON position, or start the engine. (The alarm will be deactivated or stopped after a few seconds.) ● V ...

Connecting a mobile phone
General information After the mobile phone is connected once to the vehicle, the mobile phone can be operated using iDrive and the steering wheel buttons. Connecting the mobile phone via passkey entry Via iDrive: 1. "My Vehicle". 2. "iDrive settings". 3. "Mobile devices". 4. "Connect new device". ...

2011-2022 Copyright www.tcorolla.net