Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: Malfunction

Message

and isThe yellow warning light flashes and is then illuminated continuously. A Check Control message is displayed. It may not be possible to identify tire pressure losses.

Measure

Declaration according to NHTSA/ FMVSS 138 Tire Pressure Monitoring System

Each tire, including the spare (if provided) should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.

TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.

Actions in the event of a flat tire
Normal tires 1. Identify the damaged tire. Check the tire inflation pressure in all four tires, for instance using the tire pressure gage of a flat tire kit. For tires with special approval: if the ...

Flat Tire Monitor FTM
Concept The system detects tire inflation pressure loss on the basis of rotation speed differences between the individual wheels while driving. In the event of a tire inflation pressure loss, the dia ...

Other materials:

Tire size
■ Typical tire size information The illustration indicates typical tire size. 1 Tire use (P = Passenger car, T = Temporary use) 2 Section width (millimeters) 3 Aspect ratio (tire height to section width) 4 Tire construction code (R = Radial, D = Diagonal) 5 Wheel diameter (inches) 6 Loa ...

Floor shift cable transmission control select
Replacement Hint: components: 1. Remove air conditioner unit assy Hint: refer to the instructions for removal of the air conditioner unit assy. 2. Separate air bag sensor assy center  remove the 3 bolts, separate the airbag sensor assy center. 3. Remove exhaust pipe assy 4. Remo ...

Changing gear steps in the M position
To enter 7-speed sport sequential shiftmatic mode, shift the shift lever to M. Gear steps can then be selected by operating the shift lever, allowing you to drive in the gear step of your choosing. 1 Upshifting 2 Downshifting The gear changes once every time the shift lever is operated. The ...

© 2011-2022 Copyright www.tcorolla.net