Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: Coolant

General information

Coolant consists of water and additives.

Not all commercially available additives are suitable for the vehicle. Information about suitable additives is available from a dealer's service center or another qualified service center or repair shop.

Safety information

Warning

With the engine hot and the cooling system open, coolant can escape and lead to scalding.

There is a risk of injury. Only open the cooling system with the engine cooled down.

Warning

Additives are harmful and incorrect additives can damage the engine. There is a risk of injury and risk of damage to property. Do not allow additives to come into contact with skin, eyes or articles of clothing. Use suitable additives only.

Coolant level

General information

Vehicles with gasoline engine feature two cooling circuits. Always check the coolant levels of both coolant reservoirs and refill as needed.

The coolant level is indicted using minimum and maximum markings. Depending on the coolant reservoir, the minimum and maximum markings are located at different locations.

Depending on the engine installation, the coolant reservoir is located on the right side or the left side of the engine compartment.

Checking the coolant level in the filler neck

1. Let the engine cool.

2. Open the hood.

3. Turn the lid of the coolant reservoir slightly counterclockwise to allow any excess pressure to dissipate, then open it.

4. Open the coolant reservoir lid.

5. The coolant level is correct if it lies between the minimum and maximum marks in the filler neck.

6. Close the lid.

6. Close the lid.

Adding

1. Let the engine cool.

2. Open the hood.

3. Turn the lid of the coolant reservoir slightly counterclockwise to allow any excess pressure to dissipate, then open it.

4. Open the coolant reservoir lid.

5. If the coolant is low, slowly add coolant up to the specified level; do not overfill.

6. Close the lid.

7. Have the cause of the coolant loss eliminated as soon as possible.

Disposal

environmentalComply with the relevant environmental protection regulations when disposing of coolant and coolant additives.

Engine oil types to add
General information The engine oil quality is critical for the life of the engine. Only add the types of engine oil which are listed. Safety information NOTICE Oil additives can damage the engine. Th ...

Maintenance
BMW maintenance system The maintenance system indicates required maintenance measures, and thereby provides support in maintaining road safety and the operational reliability of the vehicle. In some ...

Other materials:

Noise occurs
Inspection procedure 1 Check of speaker installation Check speaker installation condition.  Check that each speaker is securely installed. Standard: malfunction disappear. Hint: the radio is equipped with noise prevention system that does not work against the regular use of t ...

How to proceed with troubleshooting
The handheld tester can be used at step 3, 4, 6, 9. 1 Vehicle brought to workshop 2 Customer problem analysis 3 Connect the obd ii scan tool or handheld tester to dlc3 4 Check and clear dtc and freeze frame data 5 Visual inspection 6 Setting the check mode diagnosis 7 Problem sy ...

Circuit description
The airbag front rh sensor circuit consists of the airbag sensor assy center and airbag front rh sensor. Dtc b1156/b1157/15 is recorded when a malfunction is detected in the airbag front rh sensor circuit. Wiring diagram ...

2011-2022 Copyright www.tcorolla.net