Toyota Tacoma manuals

BMW 5 Series 2016-2022 Owners Manual: Concept, General information, Safety information

BMW 5 Series 2016-2022 Owners Manual / Wheels and tires / Tire Pressure Monitor TPM / Concept, General information, Safety information

Concept

The system monitors tire inflation pressure in the four mounted tires. The system warns you if there is a loss of pressure in one or more tires.

General information

Sensors in the tire valves measure the tire inflation pressure and tire temperature.

Using the tire settings in iDrive, the system can automatically display the specified target pressures and compare them with the actual tire inflation pressures.

If tires are being used that are not specified on the tire inflation pressure details on the vehicle such as tires with special approval, the system needs to be actively reset.

The system will then take over the actual tire inflation pressures as the target pressures.

When operating the system, also note the additional information found in the Tire inflation pressure chapter.

Safety information

Warning

The display of the target pressures is not a substitute for the tire inflation pressure details on the vehicle. Incorrect entries in the tire settings can lead to incorrect target tire inflation pressure values. In this case, it cannot be guaranteed that the notification of a loss of tire inflation pressure will be reliable. There is a risk of injury and risk of damage to property. Ensure that the tire sizes of the mounted tires are displayed correctly and match the details on the tires and on the vehicle.

Functional requirements

The following conditions must be met for the system; otherwise, reliable flagging of a loss of tire inflation pressure is not assured:

Tire Pressure Monitor TPM
...

Tire settings
General information The tire sizes of the mounted tires can be gathered from the tire inflation pressure details on the vehicle or directly on the tires. The tire details do not need to be re-entere ...

Other materials:

Onvehicle inspection
1. Check battery electrolyte level Check the electrolyte quantity of each cell (maintenancefree battery).  If under the lower level, replace the battery (or add distilled water if possible) and check the charging system.  check the electrolyte quantity of each cell (e ...

Standard bolt
How to determine bolt strength Specified torque for standard bolts How to determine nut strength *: Nut with 1 or more marks on one side surface of the nut. Hint: use the nut with the same number of the nut strength classification or the greater than the bolt strength classificati ...

Stabilizer bar rear
Replacement Hint: components: 1. Remove stabilizer bar rear Remove the 2 bolts, nuts and stabilizer bar. 2. Install stabilizer bar rear Install the 2 bolts, nuts and stabilizer bar. Torque: 195 nvm (1,990 Kgfcm, 144 ftlbf) Hint: install the stabilizer bar so that the ma ...

2011-2022 Copyright www.tcorolla.net