Toyota Tacoma manuals

Toyota Corolla Owners Manual: How to check and change detailed Bluetooth® settings

1 Display the “Bluetooth* Setup” screen. 2 Select “System Settings”.

3 The following screen is displayed:

1 Bluetooth® Power on/off You can change Bluetooth® function on/off 2 Bluetooth® Name
3 Change PIN-code
4 Bluetooth® Address
5 Display Phone Status
You can set the system to show the status confirmation display when connecting a telephone
6 Display Audio Player Status You can set the system to show the status confirmation display when connecting an audio player
7 Compatibility profile of the system 8 Restore default settings

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Editing the Bluetooth* PIN

Detailed Bluetooth® system settings
You can confirm and change the detailed Bluetooth® settings. ...

Editing the Bluetooth* PIN
You can change the PIN-code that is used to register your Bluetooth® devices in the system. 1 Select “Bluetooth* PIN”. 2 Input a PIN-code, and select “OK”. *: Bluetooth is a registered trademark ...

Other materials:

Inspection procedure
Hint: this dtc chart is on the premise that the engine is cranked normally. If the engine is not cranked, proceed to the problem symptoms table on page 05–42. Read freeze frame data using the hand-held tester or the obd ii scan tool. Freeze frame data records the engine conditions wh ...

Inspection procedure
1 Inspect stop lamp switch assy 2 Check harness and connector(stop lamp switch assy – ecm)   Install the stop lamp switch assy.  disconnect the ecm connector.  measure the voltage according to the value(s) in the table below when the brake pedal is depressed and releas ...

Circuit description
A thermistor is built in the engine coolant temperature sensor and changes the resistance value according to the engine coolant temperature. The structure of the sensor and connection to the ecm is the same as those of the intake air temperature sensor. Hint: if the ecm detects the dtc ...

© 2011-2020 Copyright www.tcorolla.net