Toyota Tacoma manuals

Toyota Corolla Owners Manual: Driving

►  Automatic transmission or continuously variable transmission
1 With the brake pedal depressed, shift the shift lever to D.

(, 174, 176)
2 Release the parking brake. 3 Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.

► Manual transmission 1 While depressing the clutch pedal, shift the shift lever to 1.


2 Release the parking brake. 3 Gradually release the clutch pedal. At the same time, gently depress the accelerator pedal to accelerate the vehicle.

Driving the vehicle
The following procedures should be observed to ensure safe driving: Starting the engine ...

Stopping
► Automatic transmission or continuously variable transmission 1 With the shift lever in D, depress the brake pedal. 2 If necessary, set the parking brake. If the vehicle is to be stopped f ...

Other materials:

Inspection procedure
1 Inspect skid control ecu connector(+bs terminal voltage) Disconnect the skid control ecu connector.  measure the voltage between terminals +bs (2) and gnd (1, 23) of skid control ecu harness side connector. Voltage: 10 Ц 14 v 2 Reconfirm dtc Check the dtc . Ok : n ...

Brake fluid
Bleeding Notice: wash the brake fluid off immediately if it comes into contact with any painted surface. Hint: if any work is done on the brake system or if air in the brake lines is suspected, bleed the air from the system. 1. Fill reservoir with brake fluid fluid: sae j1703 or fmvss no. ...

If a warning message or indicator is displayed (vehicles with a multi-information display)
If a warning is shown on the multi-information display, stay calm and perform the following actions: 1 Master warning light The master warning light also comes on or flashes in order to indicate that a message is currently being displayed on the multiinformation display. 2 Multi-information d ...

© 2011-2021 Copyright www.tcorolla.net